Vaporesso XROS Replacement Pods - 2 Pack [0.8ohm]

Product Information

Have an overactive thyroid or pheochromocytoma (a tumor of the adrenal gland that can affect blood pressure) This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the vendor, failure to follow the vendor's instructions, or any alteration or repair carried out without the vendor's approval. This product is intended for adult users of nicotine-containing products, particularly current smokers or vapers. Underage sale is prohibited. Do not use this product if you:

Goods supplied by the vendor are supplied with a warranty that guarantees that the goods will be free of defects for 90 days unless otherwise stated. Thanks to a top filling design, it’s easy to fill the XROS pods and each can hold up to 2ml of e-liquid. The mesh coil inside these pods helps them last longer and supports multiple refills. They can also heat more e-liquid at a faster rate to create a better flavour. The built-in coil means no more messy coil changes, as you can just replace the entire pod instead. When it comes to e-liquid, we recommend using a 50/50 or high PG e-liquid. Contains: The 2ml Xros pod is easily topped up via the filling port located underneath the mouthpiece. If the 1.2 Ohm coil is installed, your kit will produce an inhale that's closer to the feel of a cigarette. However, if you prefer a little more vapour production, we'd suggest the 0.8 Ohm coil, which can be bought separately. Conveniently, there's a huge range of high PG and 50/50 e-liquids available, all of which are compatible with the Xros Mini. Contains: With no need for a complicated menu system, the Xros Mini detects which pod you've chosen and sets the wattage to either 16W or 11W accordingly. It makes your kit simpler to use, as you don't have to figure out wattages or settings to vape. Whether the 1.2 Ohm, or the 0.8 Ohm pod (sold separately), is being used, you'll experience full flavour and a discreet amount of vapour production for an MTL inhale. With a 2ml e-liquid capacity, the XROS replacement pods can be easily refilled by simply removing the top cap mouthpiece and filling the juice port with an e-liquid of your choice. With a mesh coil build, a larger surface area is used to heat e-liquid than standard coils, delivering generous cloud production with clear and long-lasting flavour. The kit comes with the choice of a 0.8 Ohm pod or a 1.2 Ohm pod included, with both variants recommended to be paired with high PG e-liquids of 50% and above for optimum performance.

Verdict

The vendor reserves the right to vary the quoted price of the goods either upwards or downwards in line with fluctuations in the market price. If any provision in these terms is held to be invalid or unenforceable, it shall be deemed severed from these terms and this shall not affect the validity or enforceability of the remaining terms.

The Vaporesso Xros Mini pod kit is designed for easy, day-to-day vaping and is ideal for first time switchers too. The 1000mAh battery is able to support up to a day's worth of vaping, even at its 16W max power. That means you're less likely to get caught out with no battery. As well as the device itself, in your kit you'll also find a 2ml refillable Xros pod with a built-in MTL (Mouth To Lung) coil. You don't have to worry about messy coil changes, as the pod design means you can just replace the pod when needed. Features: The XROS 3 is equipped with a large 1000 mAh battery, takes 2 mL top filling pods with built-in coils, and has a button and an airflow slider. It is powered by the latest edition of the AXON chip and utilizes the COREX heating coil tech that is claimed to keep consistent flavor for longer. And finally, it is released alongside the XROS 3 Mini, a smaller edition with a preset airflow and no button.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling. Nothing in this agreement shall limit the vendor's liability for death or personal injury caused by its negligence. The Vaporesso XROS 2 replacement pods have been designed for use with the XROS 2 kit, XROS Nano Kit, and XROS Mini kit. These refillable pods allow for either an MTL inhale and feature either a standard wound coil or mesh coil for improved flavour and vapour production, available in four resistances - 0.6 Ohm, 0.8 Ohm, 1.0 Ohm and 1.2 Ohm, you’ll have the option to experiment and discover your perfect vape.

Produk ini ditujukan bagi orang dewasa pengguna produk mengandung nikotin, khususnya perokok dan vaper. Penjualan untuk anak di bawah umur tidak diperbolehkan. Jangan menggunakan produk ini jika Anda: With the 0.6ohm mesh coils, you’re looking at a maximum of two weeks and a minimum of 1.5 weeks. Again, results may vary. I’ve had a 0.6ohm XROS 3 coil crap out after 5 days but that only happened once. With SMOK pods, this kind of thing is a regular occurrence, so this, again, shows just how good Vaporesso’s coil tech is these days. The 1.0-ohm pod is clearly an MTL pod, with the airflow ranging from slightly loose to very tight. It’s a great pod for higher-strength salts, and I enjoyed using it with the airflow halfway open with 25 mg salts. It’s a warm vape and, as with the QS, flavor is great from the first puff. I’ve gone through six full pods, and there has been no drop in performance whatsoever. If you’re opening the airflow all the way, you may need to use the button, but on every other airflow setting the sensor seems very sensitive. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

With the MTL coils, the longest-lasting one I’ve had to date ran for 18 days without losing any flavor. On day 20, it was dead. But 19 days of heavy vaping with sweet, fruity nic salts vape juice is damn impressive. And the shortest lasting coil? Just shy of a week and half. Again, that’s still pretty damn good. Vaporesso XROS 3 Coil Options I’m a 1.0 ohm MTL Coil Fan: I’ve been an MTL vaper for years, and the XROS 3’s 1.0 ohm MTL coil is my go-to. It feels like the pod was specifically designed for this coil and resistance. Reliability and Consistency are Key: I’ve been using the XROS 3 for 18+ months, and I can’t emphasize enough how reliable and consistent its coils are compared to nearly every one of my other pod vapes. It literally puts them to shame.

These terms apply to cramvape.co.uk (CRAM Vape Ltd Company Number: 07343567) (the "vendor"), located at 190 Ashby Road, Scunthorpe, North Lincolnshire, DN16 2AR Let me preface this by saying that I am extremely adverse to change. I used a mod for maybe 4/5 years and loved the falcon tanks from Horizontech. As vaping got more popular and pens really started to take off, I got more and more aware of how chunky the set up was. I then developed an illness which made it difficult for me to use my arms and found that the weight of the mod was less than ideal. So I finally but the bullet and tried a pod pen system. Any delivery and despatch times mentioned are estimates only, next day delivery is a best efforts service. Have heart disease, stomach or duodenal ulcers, liver or kidney problems, throat disease, or difficulty breathing due to bronchitis, emphysema, or asthma

Battery life and charging

The COREX Heating Tech Advantage: XROS 3 uses Vaporesso’s COREX Heating Tech in its coils, and it’s a game-changer. It ensures heat is managed efficiently, making my vaping experience smoother and more even. Plus, it’s kinder to the coils, making them last longer. You must take reasonable care to ensure the goods are not damaged in the meantime or in transit. Proof of postage is not proof of delivery. The vendor cannot accept liability for goods damaged during transit. No claim for missing parcels from consignments shall be accepted if you have signed for the correct number of parcels upon delivery. The Vaporesso XROS 2 is a compact, simple option that can last all day on a single charge. Powered by a large built-in 1000mAh battery, it manages to remain small and is ideal for vaping on the go. Designed to create a small amount of vapour, it’s the perfect choice for MTL (Mouth To Lung) vaping. Easy to use and requiring little maintenance, the XROS 2 comes complete with two XROS refillable pods, each of which features a built-in mesh coil. Features: ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.