ELEGOO Neptune 3 Plus 3D Printer

Product Information

Massive Print Volume】With the largest ever build volume of 420x420x500 mm /16.53x16.53x19.68 inches, ELEGOO Neptune 3 Max gives you generous printing space to let your creativity run wild, whether for printing larger models, or printing in batches. I have a roll of two tone filament which I can't wait to print an additional vase design with. And this ability to print vases in a larger size seems to lend the vase a feeling of luxuriousness. Overview of Neptune 3 Pro】225*225*280mm market mainstream printing size can meet the needs of most users. Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.

The Z-axis of the Neptune 3 Plus has a double lead screw - for more precise movements, better print quality and higher print accuracy. After that, the print bed only needs to be leveled once manually and then automatically. The manual leveling is done via the paper method at 6 points and in the middle of the print bed. We then decidedto try something a little more intricate with a few more parts for the final print. Gambody's Klingon Bird of Prey is shown here; it is printed in several pieces, and gears are included to allow the wings to move from the normal to landing position. This print made good use of the build volume because we could fill the bed with parts, and, as with earlier prints, we used the same slicer settings with the exception of a few minor support settings adjustments. The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress. Manual print bed leveling is also supported via the menu. You can tap on the touchscreen where you want to set the z-offset next. When you have set all seven points, the 3D printer automatically starts the automatic leveling. Direct Drive ExtruderReliable Extrusion System] The double-gear metal extruder is designed with a spring elasticity adjustment and a special titanium alloy throat pipe for smoother filament feeding and more stable & precise printing, greatly reducing the risk of nozzle clogging. The large print volume of 320 × 320 × 400 mm allows you to print even large objects in one piece. Unlike its little brother, the Neptune 3 or Neptune 3 Pro, the print volume of the Neptune 3 Plus is almost 3 times larger!

Dual-Gear Direct Extruder】The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing. RSG leveling system] The 16-point RSG leveling system with a strain gauge pressure sensor on the print head to record the distance between the nozzle and the hot bed at each point. Once the sensor scans any tiny variations and unevenness, it will automatically compensate each point by adjusting the Z-axis height to ensure the same distance between the print nozzles and the bed (about 0.1-0.2mm). And Neptune 3 comes with a larger build volume of 220x220x280mm than Neptune 2. This the largest object I have ever printed on a 3D printer myself. It's a vase design I found on Printables which was naturally printed using 'Vase Mode'. Print volume: Although the Ender-3 S1 Plus is a relatively large 3D printer, the print volume of the Neptune 3 Plus is still one and a half times larger. So if print volume is important to you and print speed is secondary, the Neptune 3 Plus is recommended. Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB. They are extremely similar and share most features. However, there are a few differences that may influence your buying decision. RSG Leveling System】The 16-point RSG leveling system with a strain gauge pressure sensor on the print head to record the distance between the nozzle and the hot bed at each point. Once the sensor scans any tiny variations and unevenness, it will automatically compensate each point by adjusting the Z-axis height to ensure the same distance between the print nozzles and the bed (about 0.1-0.2mm). And Neptune 3 comes with a larger build volume of 220x220x280mm than Neptune 2. C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.

The scope of delivery of the Neptune 3 Plus contains everything needed for the assembly and the first test prints. Besides the necessary tools for the assembly, some PLA filament is also included. The assembly is done within 10 to 20 minutes.

The Elegoo Neptune 3 Plus ticks all the boxes when it comes to FDM 3D printers.

It measures 21.8cm in width and 36cm in height - it printed first time without hiccups. After the print bed had cooled it was removable from the print bed with the gentlest of touch. The in-house developed direct drive dual-gear extruder ensures an extrusion ratio of 3:1, thus ensuring outstanding extrusion force for precise prints.