Clone-A-Willy Realistic Vibrator Silicone Penis Moulding Kit, Light Skin Tone

Product Information

Press the tube against your body. The moulding gel will completely solidify in about two more minutes.

I asked my friends: “Would a dildo of ‘myself’ make a good gift?” The response was a resounding “yes.” After my inquiry, my best friend, James, liked the idea so much that decided he, too, would craft a dildo for his girlfriend. At least I wouldn't be venturing into uncharted territory alone. Right around this point was when we started to realize we'd overlooked a crucial part of this plan: “ How does one make a dildo of one's penis?” Enter the Clone-A-Willy Kit Start your timer. Cut open the bag of white moulding powder, pour it into the bowl of water and start mixing. Stir no longer than 60 seconds.

My fantastic confidence in this endeavor and product waned considerably when I unfurled the poster-size directions. The four simple steps had transformed into more than a dozen, and the incredible specificity of each step had me in an immediate state of panic. After letting the impression set, take the two jars of silicone and mix them together as thoroughly as possible in a disposable container. I ended up not using a disposable container and I'll explain what I had to do as a result in the next section. Once the materials have been mixed together, pour out any water that has accumulated in the bottom of the mold and then add the mixture very slowly. You should remember that when you add in the vibrator the silicone will be displaced, so if you are going to use the vibrator don't fill it up all of the way. For those curious about what the molding powder is made from and if it is safe to dunk your penis in it, it's made predominantly from a sodium alginate mixture with a few extra things thrown in to help it set properly. This mixture is non-toxic, contains no silica, and is completely hypo-allergenic. I've googled all of the ingredients myself and they all show up in normal products ranging from toothpaste to cosmetic products. One particular ingredient, calcium sulfate, shows up in some building materials but that makes sense judging how it solidifies into a solid mold once everything is said and done. I went through the steps more or less without a lot of fuss, but there are a couple things I will share with you that might alleviate some of your worries. The same applies to any spilled silicone. I didn't use a disposable bowl when I mixed the bags together and was at first stressed that I had to diligently wash out the still unhardened silicone from my wife's favorite mixing bowl. I later realized it would be smarter to just let the clone harden and peel it all off in one fell swoop and that's exactly what I did

Insert the silicone and cardboard assembly into the centre of the filled mould so that the cardboard rests flat against the top of the tube. Ensure to leave enough space for the vibrator to be added, or the mould may overflow. For those who love things a little frisky and risky, the perfect gift has revealed itself. With the help of this Clone-a-Willy Kit, a perfect silicone copy of either your or your partner's penis can be immortalised. It's a great gift for Valentine's Day or anniversaries or ideal to help spice things up in the bedroom. Be sure to use this product with a water based lubricant. Read the instructions carefully before using this product to avoid any unwanted side effects or reactions. Spice Up Your Sex Life As far as the finished product is concerned, neither the silicone base nor the catalyst contain any materials that disqualify them from being considered body-safe, so this is a 100% body safe DIY dildo project. Your Clone A Willy Kit comes in an 11 x 2½ inch clear plastic tube, into which you will insert your penis. If your penis is 9” or larger, or you want to make a non-vibrating dildo, keep reading! You'll need some extra materials! Pour out any water that has accumulated in the bottom of your mould and slowly pour into the silicone.

Recently Viewed

Now pour the water into a mixing bowl. This step is when the time sensitive parts begin, so make sure to pay attention. You will now cut open the bag of molding powder and stir it into the water for 45 seconds. It won't matter if the mix is a little lumpy still after 45 seconds, time is of the essence here and you just have 45 seconds to get everything mixed as well as you can. Tape around the edge of the tube. This will be pressed against your body, so you want it to be smooth. I texted James to see if he’d had success. Nope. He, too, struggled with the molding mixture, and his curved penis kept touching the sides of the tube. (If he’d been less impatient, he would’ve seen that the Clone-A-Willy kit offers a solution for men with curved penises.) All standard kits include 1 bag of molding powder. This is enough powder to make 1 mold of your penis (as shown in Fig. 2). If you want to be safe, buy a refill!