Joined in 2023 
82 
63 About this deal
Yes the smell most likely is the paint. From what you have said the fire has not been installed correctly in the space it is in and is getting the surrounding walls and surfaces too hot, this is also the most likely cause of the yellow blistering of your first paint (not mould). The fire is heating up the painted surfaces and causing them to discolour (yellowing) and then getting so hot the paint is blistering. The new paint you’ve used is obviously suffering from the same but the smell most likely will be because the paint is newer and being mould resistant probably has some additional contents to combat mould that may be giving off the smell under extreme heat. Data sheet Manufacturer Tikkurila For Use By Consumer Use Interior / Exterior Use Interior Use For Use On Concrete All metal surfaces should be clean, dry, and free from grease, oil, and other contaminants that could affect adhesion. Use a degreaser before de-rusting. Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application. De-rust according the manufacturer's instructions - usually through mechanical or blast cleaning as hand washing will not clean the surface sufficiently.
Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. The paint products offered here will not provide any increase in protection or resistance to the surfaces they are applied to. They simply provide a decorative finish that can withstand high temperatures that normal paints would not be able to tolerate. Using a normal paint to decorate these kinds of areas is not recommended as it can result in discolouration, failure by flaking/peeling/blistering, odours being omitted, and potentially creating a fire hazard. Self-priming, Rust-Oleum Heat Resistant Paint 750°C should not be applied on primers or coatings, which are not heat resistant. The surface to be painted must be clean, dry and sound and the temperature of the air/surface should be a minimum of +10°C with a relative humidity of below 80%PaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers. A new type of heatproof paint for fireplaces and firewalls exposed to higher-than-normal temperatures. Muuri ensures a breathable surface that is heat resistant up to 300°C (in standard white) and 180°C (in its 8 tinted colours), protecting the walls surrounding your fireplace or stove with a striking finish.
Mechanical strain may cause visible marks on the painted surface. This is a typical product feature of matt paints; however, it does not affect the functionality of the product Only apply if the air and surface temperatures are between 5 and 35°C and the relative humidity is less than 85%. The temperature of the coated surface must be at least 3°C above the dew point.
Filters
The surface should be thoroughly cleaned and degreased using Rust-Oleum Pre-Paint Cleaner, followed by hand or machine abrasion to impart a scratch pattern to the surface. Use non-metallic abrasives, bonded fibre machine or hand abrasive pads - Do not use high speed rotational sanders. Blast cleaning to achieve an appropriate surface profile is the best method of preparation for stainless steel, however as Rust-Oleum Heat Resistant Paint 750°C is for general/consumer use and not professional or industrial applications we can assume that in the majority of instances blast cleaning will not be achievable. The principle of requiring a profiled surface to assist in the adhesion of the paint system remains, and so preparation advice for smaller projects that still wish to attempt it would be as follows; Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. Tikkurila Muuri is a heat-resistant breathable paint recommended for use on firewalls, fireplaces and similar interior wall surfaces where the surface temperature may rise above normal. To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.
Coverage is affected by the roughness and porosity of the surface as well as the application method and conditions Surface defects and loose pointing should be filled in, with any visible signs of organic growths treated with mould remover. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour Your fireplace surround will be the centrepiece of the room, but it doesn't have to stay exactly the same colour as when you first moved into your home. Stoves and open fires are messy by nature and will mark the surrounding wall with dirt and soot deposits. Repaint your fireplace surround to match your existing decor and interior design - or contrast to make it really stand out. Once dry, the surface should now be prepared to paint over with a suitable topcoat. If your fireplace still functions then you will require a heat-resistant primer and topcoat, such as Tikkurila Murri.The variable porous structure of the surface to be painted and moisture and temperature variations during paint application and drying may cause diversity of colour Ideal for fireplaces, firewalls, and similar interior wall surfaces exposed to higher-than-normal temperatures
To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. When it comes to colour, the current most popular options are white and grey paint for an ultra modern and clean look, ideal for frequently changing rooms. A paints finish will affect the overall appearance, feel, and durability of your paint, so it’s important to understand the differences to achieve your desired aesthetic. Matt paint has a non-reflective finish, chalk paint has a matt, shabby-chic finish, while eggshell paint is low-sheen and durable. Additionally, satinwood paint has a subtle sheen and is great for interior woodwork, while gloss paint is high-shine and ideal for exterior woodwork and metal surfaces. Rust-Oleum Heat Resistant Paint 750°C, heat resistant coatings based on a silicone modified alkyd resin.
About Tikkurila
There's so much choice out there when it comes to paint and it can be difficult finding the right colour and finish for your home. There's also a whole range of brands to choose from including Dulux paint, Farrow & Ball colours, Valspar and our own GoodHome range. Can be applied on new, bright or shot-blasted steel or well pre-treated coated surfaces such as barbecues, boiler fittings, hot air cannons, exhausts, etc. Intended for small maintenance jobs and repairs, providing protection up to a dry heat of 750°C (short term peak load) for applications indoors or in a sheltered outdoor environment. It is recommended to wait for at least two weeks before the treated surfaces are put into use to ensure the product reaches the heat durability requirements
Great Deal 
New Comment