Cisco Catalyst 9115AXI-E Wireless Access Point, Wi-Fi 6, 4x4 MU-MIMO, Controller Managed, PoE, Internal antenna, (C9115AXI-E)

Product Information

Step 4. If the AP image type and AP configuration are not available in the show version output, it means the AP is running a CAPWAP image. To do the conversion, execute the command below: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Specify the profile name of your choice and a WLAN ID between 1 and 16, and set the Status toggle button to Enabled. ethernet_port wired0, ip 192.168.1.46, netmask 255.255.255.0, gw 192.168.1.1, mtu 1500, bcast 192.168.1.255, dns1 192.168.1.1, vid 0, static_ip_failover false, dhcp_vlan_failover false Monitor—In the monitor mode, specified Cisco APs can exclude themselves from handling data traffic between clients and the infrastructure. These APs act as dedicated sensors for location based services (LBS), rogue AP detection, and intrusion detection (IDS).

Access points must be discovered by a controller before they can become an active part of the network. The access point supports these controller discovery processes: Spatial Reuse (also known as BSS coloring) allows APs and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.

If the APs have the same AP type, the client load (number of associated clients) is compared and the AP with the smallest load is selected.The result? Your network stays relevant, becomes digital ready, and is the lifeblood of your organization. Health Canada states that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure you can easily do so by reorienting antennas away from the user, placing the antennas at a greater separation distance than recommended, or lowering the transmitter power output. You can also apply or pass some AAA attributes to the WLAN tied to a specific policy profile by selecting the Allow AAA Override option under Advanced > AAA Policy. Create the policy tag (if non-default needed) and map the SSIDs above to the policy profiles as required. With Cisco Services, you can achieve infrastructure excellence faster with less risk. From an initial WLAN readiness assessment to implementation, full solution support, and in-depth training, our services for the Cisco Catalyst 9124AX Series provide expert guidance to help you successfully plan, deploy, manage, and support your new access points. With unmatched networking expertise, best practices, and innovative tools, Cisco Services can help you reduce overall upgrade, refresh, and migration costs as you introduce new hardware, software, and protocols into the network. With a comprehensive lifecycle of services, Cisco experts will help you minimize disruption and improve operational efficiency to extract maximum value from your Cisco DNA-ready infrastructure.

Cisco Embedded Wireless Controller on Catalyst Access Points: Indoor, challenging environments, with external antennas. The management access interface on the EWC controller is the default interface for in-band management of the controller and connectivity to enterprise services. It is also used for communications between the controller and access points. Go to Administration > Management > HTTP/HTTPS/Netconf. Supporting four spatial streams, Multiuser Multiple-Input Multiple-Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.The flex profile is used for configuring the VLANs on the AP when the VLAN is overridden by the AAA that is used for the local switched SSIDs. The default policy profile and default policy tag are preconfigured, so no specific policy configuration is required unless they need to be customized (for example, access policies, local switched VLAN, QoS, AVC, AAA override, etc) Radio FW version : QC_IMAGE_VERSION_STRING=WLAN.HK.1.0-03095-QCAHKSWPL_SILICONZ-1.198262.4.200256.9 Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.

The IEEE 802.11ax emerging standard, also known as High-Efficiency-Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac standard. Step 5. After the AP reboots, the EWC starts in day 0 and CiscoAirProvision- SSID is broadcast. You can then configure it from the wireless configuration wizard. For more details about Catalyst 9124AX Series feature support, see Cisco's Feature Matrix on Wi-Fi 6. If no custom tags are needed, this step is not required, as default tags are associated with the APs.This model provides a way for the client/AP devices to derive their configurations from profiles that are contained within tags. APs can be mapped to the tags either statically or as part of the rule engine that runs on the controller and takes effect during the AP join process. Configuration objects are modularized as objects, which helps in the reusability of the configuration. In addition, a flat tag-based configuration model eliminates the complexities associated with inheritance and container-based grouping, leading to a simpler and more flexible configuration that can ease change management. after 4 Dec 2022 Due to Certificate Expiration - Fixed in 8.10.185.3 and latest 9800 IOS-XE releases A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to 3x to 4x the savings achieved by 802.11n and 802.11ac. Container support enables edge computing capabilities for IoT applications on the host access point.